What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 15:37

(Dc diagram shown, AC is similar).
He then asserts :
This one hit behind the barn.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Portugal beat Spain on penalties to win Nations League - Yahoo Sports
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then describes Rainy Season and Lightning.
Has your wife or girlfriend ever been felt up in public by a stranger?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–14 [Omar Gharbi Omar Gharbi ]
The third is lightning and “how it gets conducted into a home.”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Is there a band whose members have been present for every one of their concerts?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This device then solves the entire problem.
What is lightning?
Dazzling Royal Diamonds and Pearls to Celebrate Trooping the Colour in London - The Court Jeweller
what exactly is a ‘surge’ protector?
These devices are installed between the “hot” and “neutral” and protective ground.
But… the neutral is now “floating” because of the 1 ohm resistance.
Resident Evil 9, Requiem, Announced At Summer Game Fest With Trailer And Release Date - GameSpot
2024–10–10[John johnson John Johnson ]
An AC voltage/ current source, and an ac inductive load.
the problem then depends on "how fast does the fuse operate?".
'Optical neural engine' can solve partial differential equations - Tech Xplore
[image of Common-mode choke]
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why didn't people like the Game of Thrones ending?
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Upvotes:
Two former Polygon writers are starting a new site - The Verge
This is where the MOV conducts again, and dissipated the energy.
I post the exact comment here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
Which company offers affordable HVAC services in NY?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It also is a device that limits the change in current flow.
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Barnstars:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, what happens?
but this device (an Inductor) … impedes the rapid changes in the current.
A circuit breaker is similar, but is resettable.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
[old diagram got deleted by accident]
The bolt then partially travels down the line to your home.
One is “what exactly is in a ‘surge protector’ ? ”
These are simplified answers to the original question, and does not change anything I wrote above.
eight
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
The other is “what does a “fuse” do?”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At least they know the answer if they wanted it.
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
First Sentence:
In schematic diagrams this is the symbol for a fuse:
Now when you have a certain ac resistance, then a current flows in a loop.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What does a fuse do?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
For this case there are devices called Metal oxide varistors (MOV).
but I think this circuit , shows a few more pieces.
There are two important concepts here.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At one ohm, the resistor has a maximum of 1 watt power.
a photo is worth a thousand words.
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
There are three different concepts here that are getting confused.
Edit 2024–10.
nine
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, the voltage could go up to 500 volts, and the fuse will not open up.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.